I'm new here and in the HV electronics.
First I want to start slowly: I.e. ne run ignition coil. I have even no MOSFETs, etc. at home. But ne can be run the ignition coil, even without control?
Be is certainly a: bunch: a question for you, but I prefer before Farrell, eh I put the things up that. At least not if lightning should come out ;).testing jobs
If you do not have the necessary parts you can order yes or search for an electronics store in your area. So much will not cost.
(Or simply e-waste dismantling). You have to wait times at reichelt or how to order, which is not really expensive Yes also. Goes just the cable manually move back and forth, so switch by hand: troll face:
And a little initiative as a beginner it is also well-enough on the subject of ignition coils on the MK's page and on other pages to read. just in series to the ignition switch, 12V type on it and to rejoice over the gefritzel.
User avatar
If you thing that 12V can operate, then kannstes try out. Only, I don't know whether this is a classic summer with wagnerschem hammer. If no, then gehts nich. But try goes study: Hau ran the thing. So there were three connections, a for + and - and one where the AGM we issued.
The old cable shoes and a little cable was still.
However should the HV - connected (nagut, connected but not "properly", you know what I mean) be or not?
That makes me somewhat suspicious, because there were the two cables at the cable lug, + was moored?
a thin and a thick. -Was only one cable. The part from the radif link is a (piezo) summer,
If kannsts yours (only 24V stop) is bent.
If you want dancing on really absolutely no electronic driver nu can
still a electro mechanical circuit breaker zusammenfrickeln.
Funkenandi iwo right, if necessary even in "Manual mode".
E.G. pulley made of nonconductive material (wood/plastic) - in uniform Abstän-
put the leitenes material (aluminium foil, thin sheets, etc.) - wire two
Contacts turn that press on the disc.
If the disc is then rotated surfaces have through conductive/non-conductive
the on/off effect of the ZS to the "sparken" needs. HV testing
Then it true license incorrectly assembled. Already right on minus
include 2 cable. One for the supply of one as an Antipole to the HV output
